Loading...

Charger II-SF Side Discharge
  • Charger II-SF Side Discharge

    Charger II-SF Side Discharge

  • Charger II-FB Semi Overhead Discharge

    Charger II-FB Semi Overhead Discharge

  • Floater Loader

    Floater Loader

  • SS-429

    SS-429

Ray-Man, Inc. is a family owned business located in Southeastern Iowa. They are committed to a high level of customer service—stemming from their lasting relationships with their customers, dealers and suppliers.

Manufacturing Ag Equipment since 1975. Ray-Man has over 35 years of experience building the right fertilizer tender for the customer.

The Charger II-SF Side-Discharge Tender is efficient, unloading up to 4,000 pounds per minute. The discharge auger rests on the fender for safe and easy transport. A hydraulic cylinder folds the discharge tube out to the unloading position.

Another hydraulic cylinder raises or lowers the discharge tube to the desired height. Discharge augers are available in several lengths to accommodate the customer's needs.

Charger II-SF

12, 14, 18, 20 and 24 ft Charger II Transports SF

  • 409 or 304 stainless steel 2-6 compartment 40° hoppers with dump gates, transitions and auger tubes
  • 9 in. floor auger with adjustable speed control
  • Charger II-SF folding 9 in. discharge auger x 15 ft long
  • Hydraulic discharge height adjustment and tandem hydraulic pump
  • Oil reservoir with filter, sump strainers, temperature/sight gauge direct drive hydraulic motors, rear mounted control valves with adj. relief
  • Full-length stainless steel enclosed fenders with mud flaps
  • Rear mounted ladder and optional front ladder
  • Integral rear bumper
  • Sealed marker lights mounted in rubber grommets and tail lights
  • Shur-Lok Roll tarp or SRT-2 SS electric roll tarp
  • Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish

Charger II-SF Semi

30, 36, or 42 ft Charger II Transport Semi Trailer

  • 409 or 304 SSl 2-6 compartment 40° hoppers with dump gates, transitions and auger tubes.
  • 9 in. floor auger with adjustable speed control.
  • Charger II-SF folding 9 in. discharge auger x 15 ft long
  • Hydraulic discharge height adjustment and tandem hydraulic system
  • Integrated trailer frame with vertical "X" braces, (2) 22,500 lb axles, 16.5 x 7 air brakes, Anti-Lock braking system, automatic brake adjusters, hutch 9700 three leaf spring suspension, unimount hubs, 10-hole steel disc wheels, integral rear bumper and 11R22.5 G radial tires
  • Rear mounted ladder and optional front ladder
  • Sealed marker lights mounted in rubber grommets and tail lights
  • Shur-Lok Roll tarp or SRT-2 SS electric roll tarp
  • Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish
  • Optional: split compartments, 304 SS option, 409 stainless steel frame, top catwalk, stainless steel auger flighting, floor auger pit dump slide gate Epoxy ester primer, modified urethane finish in lieu of standard, air shift PTO, Charger II-FB 270° discharge system

Augers

The Charger II-SF models have a 12 gauge stainless steel tube with removable end caps under the hopper assembly. The floor auger has adjustable speed controls to allow for different density materials. A positive, no leak transition between the floor and discharge auger keeps the fertilizer off the ground.

The augers are constructed with mild steel heliocoid auger flighting and mild steel pipe. All of the augers are available with optional stainless steel flighting as well as stainless steel pipe.

The Charger II-FB Overhead-Discharge Tender features a 9—12—9 auger system. This versatile system can rotate 270 degrees, allowing you to unload to the left, right or the rear of the tender. A hydraulic motor is connected to a gearbox that rotates the horizontal discharge auger.

The heavy-duty hydraulic cylinder will lift the auger up and power it down. An optional bolt-on extension for the discharge auger is available. The Charger II-FB will unload up to 3,500 pounds per minute.

Charger II-FB

12, 14, 18, 20 and 24 ft Charger II Transports FB

  • 409 or 304 SS 2-6 compartment 40° hoppers with dump gates, transitions and auger tubes
  • 9 in. floor auger with adjustable speed control
  • Charger II-FB 270° 9 in. discharge auger x 14 ft long
  • Hydraulic discharge height adjustment and tandem hydraulic pump
  • Oil reservoir with filter, sump strainers, temperature/sight gauge direct drive hydraulic motors, rear mounted control valves with adj. relief
  • Full-length SS enclosed fenders with mud flaps
  • Rear mounted ladder and optional front ladder
  • Integral rear bumper
  • Sealed marker lights mounted in rubber grommets and tail lights
  • Shur-Lok Roll tarp or SRT-2 SS electric roll tarp
  • Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish

Charger II-SB Semi

30, 36, or 42 ft Charger II Transport Semi Trailer FB

  • 409 or 304 SSl 2-6 compartment 40° hoppers with dump gates, transitions and auger tubes
  • 9 in. floor auger with adjustable speed control
  • Charger II-FB 270° 9 in. discharge auger x 14 ft long
  • Hydraulic discharge height adjustment and tandem hydraulic system
  • Integrated trailer frame with vertical "X" braces, (2) 22,500 lb axles, 16.5 x 7 air brakes, Anti-Lock braking system, automatic brake adjusters, hutch 9700 three leaf spring suspension, unimount hubs, 10-hole steel disc wheels, integral rear bumper, and 11R22.5 G radial tires
  • Rear mounted ladder and optional front ladder
  • Sealed marker lights mounted in rubber grommets and tail lights
  • Shur-Lok RolShur-Lokr SRT-2 SS electric roll tarp
  • Entire unit is acid washed, coated with a modified alkyd 3.5 VOC primer and a white alkyd enamel finish.
  • Optional: split compartments, 304 stainless steel option, 409 stainless steel frame, top catwalk, stainless steel auger flighting, floor auger pit dump slide gate Epoxy ester primer, modified urethane finish in lieu of standard, air shift PTO, Charger II-FB 270° discharge system

Augers

The Charger II-FB models have a 12 gauge stainless steel tube with removable end caps under the hopper assembly. The floor auger has adjustable speed controls to allow for different density materials. A positive, no leak transition between the floor and discharge auger keeps the fertilizer off the ground.

The augers are constructed with mild steel heliocoid auger flighting and mild steel pipe. All of the augers are available with optional stainless steel flighting as well as stainless steel pipe.

The Charger II-CB Belt-Discharge Tender is designed for multiple uses. The tandem conveyor system can be used to transfer fertilizer or grain and is gentle enough to handle seed. The 9 inch stainless steel floor conveyor contains a 12 inch PVC belt. The product is transferred to the 16 inch discharge conveyor belt. The simple design of the rear-folding discharge conveyor makes it easy to operate.

The 20 in. discharge conveyor is extended with the hydraulic cylinders and raised into the desired unloading height.

The Charger II-CB will unload fertilizer at a rate of 2,000 pounds per minute or seed at 29 bushels per minute.

FL-24

  • Eliminate stockpile clean-up
  • Unload lime, fertilizer, dirt or rock
  • Wide, low speed belt for gentle handling
  • Easily towed behind floater or pick-up
  • 24 in. wide 2 ply rubber belt with Flexco 550J splice lacing
  • 6 in., 8.2 lb. structural "C" channel frame rails
  • 4.5 in. diameter 35° tri-rollers with sealed bearings
  • 12 in. diameter drive pulley with rough top lagging
  • 10 in. diameter self-cleaning tail pulley
  • Square tubular steel under carriage frame
  • 3,000 lb. hubs and spindles, 6 bolt on 6 in. bolt circle
  • 15 in. x 6 in. steel wheels
  • 265/75R-16-C radial tires
  • Intake hopper 40 in. deep x 110 in. long x 28 in. overall height
  • 10 in. diameter roller wheels on end of hopper
  • Self-aligning return roller
  • Adjustable 3/4 in. clevis pin hitch
  • Class III safety chains
  • Unit is acid washed, coated with an epoxy ester primer and a red alkyd enamel finish
  • Control valve with adjustable pressure relief
  • Heavy duty chain drive hydraulic motor
  • One pair 3/4 in. x 15 ft. long hydraulic hook-up hoses with quick couplers
  • 27 hp Kohler CH740 air-cooled gas engine
Optional
  • Wireless remote control for throttle and belt
  • 3 in. pintle hitch
  • 2-5/16 in. ball coupler
  • Tail light package
  • 30 hp Deutz F2L2011 air-cooled diesel engine
  • Chevron-top belt

FL-30

  • Eliminate stockpile clean-up
  • Unload lime, fertilizer, dirt or rock
  • Wide, low speed belt for gentle handling
  • Easily towed behind floater or pick-up
  • 30 in. wide 2 ply rubber belt with Flexco 550J splice lacing
  • 6 in., 8.2 lb. structural "C" channel frame rails
  • 4.5 in. diameter 35° tri-rollers with sealed bearings
  • 12 in. diameter drive pulley with rough top lagging
  • 10 in. diameter self-cleaning tail pulley
  • Square tubular steel under carriage frame
  • 6,000 lb. hubs and spindles, 6 bolt on 6 in. bolt circle
  • 11R22.5G radial tires
  • Intake hopper 46 in. deep x 120 in. long x 28 in. overall height
  • 10 in. diameter roller wheels on end of hopper
  • Self-aligning return roller
  • Adjustable 3/4 in. clevis pin hitch
  • Class III safety chains
  • Unit is acid washed, coated with an epoxy ester primer and a red alkyd enamel finish
  • Control valve with adjustable pressure relief
  • Heavy duty chain drive hydraulic motor
  • One pair 3/4 in. x 15 ft. long hydraulic hook-up hoses with quick couplers
  • 41 hp Deutz F3L2011 air-cooled diesel engine
Optional
  • Wireless remote control for throttle and belt
  • 3 in. pintle hitch
  • 2-5/16 in. ball coupler
  • Tail light package
  • 68 hp Kubota V3300 water-cooled diesel engine
  • Chevron-top belt

SS-429

  • The augers are constructed with mild steel heliocoid auger flighting and mild steel pipe. All of the augers are available with optional stainless steel flighting as well as stainless steel pipe.
  • 12 in. deep frame rails are constructed of 12 gauge 304 stainless steel for rigidity
  • 10 ft long horizontal intake section is only 7.5 in. tall to fit beneath most hoppers
  • 30 ft long incline frame is angled at 25° for less rollback
  • Industry exclusive stainless steel pulleys and rollers
  • 13 ft discharge height
  • High torque hydraulic motor
  • Control valve with built-in belt speed control
  • Adjustable discharge chute
  • Adjustable wheelbase for perfect weight balance
  • Tubular steel undercarriage
  • 1.5 in. drive pulley bearings
  • 1.25 in. take-up and hold-down wheel bearings
  • P235/75R15C tires on steel wheels
Optional
  • Hopper flares:
    14 in. tall x 36 in. wide x 92 in. long
  • Intake hopper:
    24 in. tall x 36 in. wide x 96 in. long
  • Hydraulic powered wheels
  • Electric/hydraulic drive
  • Stainless steel dust cover
  • Caster wheel on hitch
  • Belt wiper for sticky material
  • Smooth top belt

SS-3000

  • 30 in. wide belt
  • 12 in. deep frame rails are constructed of 12 gauge 304 stainless steel for rigidity
  • 10 ft long horizontal intake section is only 7.5 in. tall to fit beneath most hoppers
  • 30 ft long incline frame is angled at 25° for less rollback
  • Industry exclusive stainless steel pulleys and rollers
  • 13 ft discharge height
  • High torque hydraulic motor
  • Control valve with built-in belt speed control
  • Adjustable discharge chute
  • Adjustable wheelbase for perfect weight balance
  • Tubular steel undercarriage
  • 1.5 in. drive pulley bearings
  • 1.25 in. take-up and hold-down wheel bearings
  • P235/75R15C tires on steel wheels
Optional
  • Hopper flares:
    14 in. tall x 36 in. wide x 92 in. long
  • Intake hopper:
    24 in. tall x 36 in. wide x 96 in. long
  • Hydraulic powered wheels
  • Electric/hydraulic drive
  • Stainless steel dust cover
  • Caster wheel on hitch
  • Belt wiper for sticky material
  • Smooth top belt