Loading...

Mounted Spreader
  • Mounted Spreader

    Mounted Spreader

  • Patented Spinners & Funnel

    Patented Spinners & Funnel

  • Accessories

    Options

  • Pan Test

    Wide & Flat Spreads

  • Pull Spreader

    Pull Spreader

The GVM Double Duty spreader line offers the widest, most accurate spreading pattern in the industry.  The Double Duty spreads a guaranteed 90 to 105 feet at a less than 15 percent coefficient of variation with granular fertilizer. Its wide spread pattern is due to the patented, reverse rotating spinner, and its accuracy is due to the pre-adjusted funnel forcing material to fall directly onto the spinner disc.

The Double Duty’s wider spread pattern allows you to make fewer trips through the field, saving you fuel and time while minimizing field compaction.

  • Single product applicator
  • Patented spinner design spreads a guaranteed 90-105 ft pattern
  • Spreads fertilizer, gypsum, lime, and most litters
  • 34 in. wide belt-over-chain conveyor for even flow to spinners and to avoid bridging when spreading lime and litter
  • Patented funnel divider allows the material to flow to the spinners with pinpoint control
  • 24 in. computer controlled spinners maintain consistency and accuracy
  • Multiple capacities to fit any machine:
    • 8.0 ton, 10 ft, 250 ft3 struck capacity
    • 9.5 ton, 12 ft, 305 ft3 struck capacity
    • 11 ton, 13 ft, 330 ft3 struck capacity
  • Available in 304 or painted 409 stainless steel
  • Raven or Ag Leader controller and GPS
  • Raven controller and GPS options:
    • SCS 5000 CAN controller
    • Envizio Pro CAN Controller with built-in Phoenix 200 helix receiver
    • Viper Pro CAN controller with guidance software  
  • All stainless steel fenders with mud flaps
  • Brand PWM control with 180-count rate sensor and CAN node
  • Bin level sensors
  • DOT LED side marker lights, rear LED 3 light lightbar LED taillight kit, trailer plug, and back-up alarm  
  • Stainless steel bi-fold ladder
  • Frame cover, 304 stainless steel (underbody panel recommended)
  • Fusion Cable-Lok Roll Tarp with stainless bows                         
  • Fusion Electric Cable-Lok Roll Tarp with transmitter and stainless bows
Double Duty Fusion Insert MicroBin
  • Dual hopper removable insert, to broadcast two products simultaneously
  • Twin hoppers are at even heights for easy loading and roll tarp installation
  • Holds 3 tons urea, 4 tons pot ash, 95 ft3 capacity
  • Made of all 304 SS
  • 27 in. no. 4 belt-over-chain conveyor system
  • Bolt into the Double Duty to apply up to three products
  • Add-on hopper allows you to spread granular micronutrients or seeds as a second or third product
  • All 304 SS construction
  • 11 ft3, 1100 lb struck capacity
  • Control system offers special features for controlling drag to ground speed regardless of varying terrain
  • Ability to automate spinner speeds within 3%
  • Viper DGPS controller
  • 55 gal. PWM hydraulic system spreads rates as low as 100 lb fertilizer per acre and as high as over 3 tons of lime per acre at speeds over 12 mph
  • Raven 180 count sensor, 40 gal. hydraulic reservoir, 12V cooler, and pressure relief valve system
  • Patented PWM controlled 24 in. 304 SS spinner design
  • Commercial heavy-duty gear motors with double bearing output shafts bottom mounted to ¼ in. 304 SS spinner nest assembly
  • Standard quick-change 304 SS uniquely designed lime and fertilizer funnel with hillside divider
  • No. 4, 34 in. belt-over-chain conveyor system 
    • Heavy-duty pintle chain
    • Multi-ply belt riveted (5 rivets per crossbar) to crossbars
    • Solid rubber sealer strips
    • Twin-line chain oiler with clear sight-gauge tubing
  • Inverted removable V-shield reduces the chance of lime bridging and protects the conveyor system, 9.5T and 11.0T models only
  • Rawson 6:1 reduction dual-pinion spur gear drive with two hydraulic Charlyn motors drives the conveyor chain
  • All 304 SS or painted 409 SS body construction
    • 10 gauge hopper
    • 7 gauge subframe
    • 4 x 2 x 3/16 in. SS cross tubes (mild steel cross members on 409 SS construction)
  • Four point attach locations for full flotation combo mount
  • Bolt-in rear end gate matches steel of spreader

The GVM Double Duty Spreader line offers a unique control system and the widest, most accurate spreading pattern in the industry, regardless of varying terrain. With a unique spinner design and the ability to automate spinner speeds within 3%, the Double Duty always maintains a constant spread pattern.

The Double Duty’s wide and accurate spread pattern is due to its patented, reverse rotating spinners and the pre-adjusted funnel, which forces material to fall directly onto the spinner disc. The Double Duty offers a guaranteed 90- to 105-foot spread pattern at a less than 15% coefficient of variation with granular fertilizer. Its wider spread pattern allows you to make fewer trips through the field, to minimize compaction and reduce fuel consumption.
Featuring a 34-inch wide belt-over-chain conveyor, the Double Duty spreader provides an even flow to the spinners with no bridging when spreading lime or litter. Its patented funnel divider allows material to flow to the spinners with pinpoint control, and its 24-inch computer controlled spinners maintain consistency and accuracy.

Features

  • Spreads a guaranteed 90-105 ft
  • Adjustable spread pattern
    • Lime up to 60 ft
    • Fertilizer 90-105 ft
  • 34 in. belt-over-chain conveyor
  • Removable inverted V-shield to keep excess weight off belt
  • Manually controlled single gate
  • PWM spinner speed control from the computer
  • Tractor hydraulic pump minimum:
    • 8.0T: 25-35 gpm @ 2,500 psi
    • 9.5T & 11.0T:  42-52 gpm @ 2,500 psi
  • Adjustable combination hitch
  • 304 or painted 409 SS

Construction Options

  • Fusion Ready 8.0 ton, 250 ft3 struck capacity
  • Fusion Ready 9.5 ton, 305 ft3 struck capacity
  • Fusion Ready 11.0 ton, 330 ft3 struck capacity

Multi-Product Options

Double Duty Fusion Insert

  • Simultaneously spreads up to two products, 3 ton
  • 95 ft3 struck capacity

MicroBin

  • Add-on, removable hopper allows you to spread granular micronutrients or seeds as a second or third product
  • 11 ft3, 1100 lb struck capacity

Options

  • Bin level sensors
  • Shur-Lok Fusion Cable-Lok roll tarp with SS bows, installed
  • Shur-Lok Fusion Electric Cable-Lok roll tarp with SS bows, installed
  • DOT LED side marker lights, rear LED 3 light lightbar, LED taillight kit, trailer plug, and back-up alarm
  • Raven, Ag Leader, or ISOBUS controller and GPS options
  • 380/90R46 row crop tires or 650/75R32 or 800/65R32 flotation tires

Controller and GPS Options

  • Raven SCS 5000 CAN controller
  • Raven Envizio Pro CAN controller with built-in 200 Phoenix helix receiver
  • Raven Envizio Pro variable rate software
  • Raven Viper 4 CAN controller with guidance software (need a receiver for GPS)
  • Ag Leader Integra (need a receiver for GPS)
  • Ag Leader Edge
  • RGL 600 all weather lightbar
  • Phoenix 200 GPS smart antenna with remote key pad, WAAS correction, and 10 hz tilt compensated receiver

Hopper

 

8.0 Ton

 9.5 Ton

11.0 Ton

Dimensions

10 ft x 102 in. wide

12 ft x 102 in. wide

13 ft x 102 in. wide

Struck capacity

250 ft3 (7.1 m3)

305 ft3 (8.6 m3)

330 ft3 (9.3 m3)

Sub-frame construction

7 gauge subframe,
4 x 2 x 3/16 in. SS cross tubes  

7 gauge subframe,
4 x 2 x 3/16 in. SS cross tubes  

7 gauge subframe,
4 x 2 x 3/16 in. SS cross tubes  

Construction

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS

Supports

Inverted V-shield keeps excess weight off belt to prevent bridging, matches steel of spreader

Inverted V-shield keeps excess weight off belt to prevent bridging, matches steel of spreader

Rear gates

Bolt-in rear end gate, matches steel of spreader   

Bolt-in rear end gate, matches steel of spreader   

Bolt-in rear end gate, matches steel of spreader   

Conveyor

 

8.0 Ton

9.5 Ton

11.0 Ton

Size

#4, 34 in. belt-over-chain conveyor

Material

Heavy duty pintle chain with multi-ply belt, riveted to the crossbar
(five rivets per crossbar)

Heavy duty pintle chain with multi-ply belt, riveted to the crossbar
(five rivets per crossbar)

Heavy duty pintle chain with multi-ply belt, riveted to the crossbar
(five rivets per crossbar)

Belt sealer

Solid rubber sealer strips prevent material from leaking off chain

Solid rubber sealer strips prevent material from leaking off chain

Solid rubber sealer strips prevent material from leaking off chain

Chain oiler

Twin-line with clear sight gauge tubing

Twin-line with clear sight gauge tubing

Twin-line with clear sight gauge tubing

Spinners

 

8.0 / 9.5 / 11.0 Ton

Size and construction

24 in., 304 SS

Spread width

90-105 ft (27.4-32 m)

Application rate

PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 tons lime/acre at speeds over 8 mph

Accuracy

180 count sensor, pairs with any field computer

Spinner motors

Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted to ¼ in.,
304 SS spinner nest assembly

Spinner speed

Computer controlled hydraulic PWM valve

Belt control

Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors

Hillside divider

Quick change, 304 SS, uniquely designed for lime and fertilizer

Hydraulics

 

8.0 Ton

9.5 Ton

11.0 Ton

Requirement

Minimum
25-35 gpm@ 2500 psi

Minimum
42-52 gpm@ 2500 psi

Minimum
42-52 gpm@ 2500 psi

Chassis

 

8.0 Ton

9.5 Ton

11.0 Ton

Frame

2 x 6 x ¼ in.
rectangular tubing

3 x 8 x ¼ in.
rectangular tubing

3 x 8 x ¼ in.
rectangular tubing

Width

120 in. (3.05 m)
center-to-center

120 in. (3.05 m) outside,
60 in. (1.52 m) inside,
center-to-center

120 in. (3.05 m) outside,
60 in. (1.52 m) inside,
center-to-center

Overall length

18 ft 9 in. (5.72 m)

22 ft (6.71 m)

23 ft (7.01 m)

Clearance

34 in. (0.86 m)

36.5 in. (0.93 m)

36.5 in. (0.93 m)

Axle

25,000 lb single axle design

50,000 lb single axle design

50,000 lb single axle design

Hitch

Adjustable combination hitch

Adjustable combination hitch

Adjustable combination hitch

Tires

 

8.0 Ton

9.5 Ton

11.0 Ton

Standard tires

380/90R46

Dual 380/90R46

Dual 380/90R46

Flotation tires

650/75R32 or 800/65R32, optional

650/75R32 or 800/65R32, optional

650/75R32 or 800/65R32, optional

Multi-Product Options

 

8.0 Ton

9.5 Ton

11.0 Ton

Fusion Insert

Dimension

5 ft x 102 in. wide,
peaked ends

5 ft x 102 in. wide,
peaked ends

5 ft x 102 in. wide,
peaked ends

Capacity

3 ton, 95 ft3

3 ton, 95 ft3

3 ton, 95 ft3

Hopper capacity

111 ft3 with Fusion Insert

111 ft3 with Fusion Insert

111 ft with Fusion Insert

Products

Simultaneously spread up to two products

Simultaneously spread up to two products

Simultaneously spread up to two products

Control

PWM fast close drag valve with conveyor rate sensor and bin level sensor

PWM fast close drag valve with conveyor rate sensor and bin level sensor

PWM fast close drag valve with conveyor rate sensor and bin level sensor

Mounting

Removable, mounts inside Double Duty after removing end gate

Removable, mounts inside Double Duty after removing end gate

Removable, mounts inside Double Duty after removing end gate

MicroBin

Construction

304 SS with sight glass, vented for quick fill

304 SS with sight glass, vented for quick fill

304 SS with sight glass, vented for quick fill

Capacity

1,100 lb, 11 ft3 struck

1,100 lb, 11 ft3 struck

1,100 lb, 11 ft3 struck

Products

Spread granular micronutrients as a second or third product

Spread granular micronutrients as a second or third product

Spread granular micronutrients as a second or third product

Control

Hydraulic servo controlled metering wheel, with rate sensor and single product control node

Hydraulic servo controlled metering wheel, with rate sensor and single product control node

Hydraulic servo controlled metering wheel, with rate sensor and single product control node

Mounting

Removable, rear mounted

Removable, rear mounted

Removable, rear mounted

Application rate

3-35 lb per acre

3-35 lb per acre

3-35 lb per acre